How to Connect HP envy 6000 Printer to WiFi: A Guide for Beginners and Pros

If you’ve recently purchased an HP envy 6000 printer and are eager to set it up wirelessly, you’re in the right place. This step-by-step guide will walk you through everything you need to know to connect your HP envy  6000 printer to WiFi — whether you’re a beginner or an experienced user.

Step 1: Prepare for HP Wireless Setup

Before you start, make sure you have:

• A stable WiFi network (2.4 GHz is recommended).
• Your WiFi name (SSID) and password.
• The HP Smart App installed on your smartphone or computer. You can download it from 123.hp.com/setup.

Step 2: Power On and Reset Network Settings (if needed)

1. Turn on your HP envy 6000 printer.
2. If the printer was previously connected to another network, reset the network settings:
• Press and hold the Wireless and Cancel buttons together for 5 seconds.
• The WiFi light will blink, indicating the printer is ready for setup.

Step 3: Connect the Printer to WiFi

You can connect your printer using the HP Smart App or the WiFi Setup Mode.

Option 1: Using the HP Smart App

1. Open the HP Smart App on your mobile or PC.
2. Click “Add Printer” and select your HP 6000 series printer.
3. Choose WiFi setup and follow the on-screen instructions.
4. Enter your WiFi password when prompted.
5. Wait for the confirmation — the WiFi light on your printer will stop blinking and remain steady.

Option 2: Using WPS (Wi-Fi Protected Setup)

1. Press and hold the Wireless button on the printer for 3 seconds until it starts blinking.
2. Within 2 minutes, press the WPS button on your router.
3. Once connected, the printer’s Wireless light will stay solid.

Step 4: Print a Wireless Network Test Report

To confirm your connection:

• Press and hold the Information (i) button on the printer.
• A test page will print, showing your printer’s WiFi connection status.

Step 5: Add the Printer to Your Devices

• Windows/Mac: Go to Printers & Scanners, then click Add a Printer.
• Mobile Devices: Ensure your phone is connected to the same WiFi network, then open the HP Smart App to start printing or scanning wirelessly.

Quick Tips

• Keep your printer close to the router during setup.
• Avoid using VPN or guest networks.
• If WiFi drops, try restarting your router and printer.

• Conclusion
• Connecting your HP ENVY 6000 printer to WiFi is simple with the right steps. Whether you’re new to printers or a tech-savvy user, the HP Smart App and WPS method make setup quick and efficient. Once connected, you can enjoy seamless wireless printing from anywhere in your home or office.